Made in Ahmedabad INDIA · Exporting worldwide
7,000+
Installations
across India & export markets
300
Fans / Month
manufacturing capacity
20,000
Sq.Ft. Facility
dedicated HVLS plant
CE
Certified
by TUV Nord, third party
13
Export Markets
including the USA
From The Manufacturer

Built, Sized & Supported By Us

Fulfilment centres, distribution warehouses, manufacturing plants, dairy barns and gyms across the USA are large, tall buildings. Through the hot summers of Texas, Georgia and Arizona, Austar HVLS fans keep a cooling breeze moving across the whole floor, and in colder states they run in reverse through winter to push heat trapped under the roof back down to where people work, cutting heating demand.

  • Reverse rotation brings warm ceiling air down in winter
  • Roughly a tenth of a watt per square foot of floor, versus about 2.5 W for conventional fans
  • Coverage up to 20,000 sq.ft. from a single 24 ft fan
  • Sea freight to Houston, Savannah, New York–New Jersey or Los Angeles–Long Beach
  • BMS-compatible VFD in an IP54 powder coated cabinet
Austar HVLS fan installation — HVLS fans for USA
2017Manufacturing HVLS since
5 Models · CE Certified By TUV Nord

Geared HVLS Fan Supplier In USA

Five AS series models from 12 to 24 ft, each driven by a Nord or SEW German make inline helical geared motor — built for long operating hours in distribution centres and manufacturing halls.

Geared Range
6 Models · Direct Drive

Gearless HVLS Fan Supplier In USA

Six direct drive ASGL models from 8 to 24 ft. With no gearbox there is no gear oil to change, and noise stays below 40 dB — suited to gyms, barns and spaces where people talk or train under the fan.

Gearless Range
Why Austar

Why Businesses In USA Choose Austar

01

Summer And Winter From One Fan

Forward rotation for a cooling breeze in Texas or Arizona heat; reverse rotation to push trapped roof heat back down through northern winters.

02

Low Running Load

A running load near 0.1 watt for each square foot served — a fraction of what conventional fans draw over the same area.

03

Controls That Fit Your Building

VFDs housed in an IP54 powder coated steel cabinet, wall mounted 4 to 5 ft from the floor and compatible with building management systems.

04

Engineered Hardware

Unbrako or TVS 10.9 grade fasteners with Nyloc nuts, SS wire rope around every bolted joint, and a radiography tested die cast hub.

05

A Dedicated HVLS Plant

A 20,000 sq.ft. facility in Ahmedabad that makes nothing but HVLS fans, with capacity for 300 fans a month.

06

Specifications Checked Up Front

Requirements in the USA differ from Europe, so we confirm your project’s electrical and listing requirements before quoting.

Our Clients

Trusted By Brands Across India & Beyond

More than 7,000 Austar fans are running today across manufacturing, logistics, automotive and institutional buildings, and eighty percent of our orders come from existing customers.

Fans installed
7,000+
Orders from repeat customers
80%
Manufacturing since
2017
Export markets
13
Client logo
Client logo
Client logo
Client logo
Client logo
Client logo
Client logo
Client logo
Client logo
Client logo
Client logo
Client logo
Client logo
Client logo
Client logo
Client logo
Client logo
Client logo
Client logo
Client logo
Client logo
Client logo
Client logo
Client logo
Applications

HVLS Fans For Every Kind Of Site In USA

Warehouses and fulfilment centres, automotive and manufacturing plants, dairy barns and gyms are the building types we are asked about most in the USA.

Sizing

What Your Shed Size Actually Needs

Coverage per fan for a clear-span building at standard mounting height, in square feet. Divide your floor area by the coverage for a first fan count; racking and clear height are worked into the final layout.

Get An Exact Layout
HVLS fan coverage by model
ModelRangeDiameterAir DeliveryCoverage Per Fan
ASGL086 Gearless 8 ft 95,000 CFM up to 2,500 ft² (≈ 230 m²)
ASGL106 Gearless 10 ft 120,000 CFM up to 4,000 ft² (≈ 370 m²)
AS125 Geared 12 ft 135,000 CFM up to 6,500 ft² (≈ 600 m²)
ASGL126 Gearless 12 ft 180,000 CFM up to 6,500 ft² (≈ 600 m²)
AS165 Geared 16 ft 185,000 CFM up to 10,000 ft² (≈ 930 m²)
ASGL166 Gearless 16 ft 355,000 CFM up to 10,000 ft² (≈ 930 m²)
AS185 Geared 18 ft 200,000 CFM up to 13,000 ft² (≈ 1,210 m²)
AS205 Geared 20 ft 350,000 CFM up to 16,000 ft² (≈ 1,490 m²)
ASGL206 Gearless 20 ft 410,000 CFM up to 16,000 ft² (≈ 1,490 m²)
AS245 Geared 24 ft 390,000 CFM up to 20,000 ft² (≈ 1,860 m²)
ASGL246 Gearless 24 ft 485,000 CFM up to 20,000 ft² (≈ 1,860 m²)
How It Works

From Enquiry To Commissioning In USA

  1. 01

    Share Your Building

    Send the site location, floor area, clear height, racking layout and whether the building is heated.

  2. 02

    Specification Check

    We confirm your electrical supply and any listing requirements, then recommend models and fan positions.

  3. 03

    Ocean Freight

    Fans are run tested, packed to protect the blades and shipped by sea to a US port with full export documentation.

  4. 04

    Start-Up Support

    Your installer receives mounting guidance and remote help setting VFD parameters for summer and winter operation.

Across USA

HVLS Fan Supply Across USA

Houston, Dallas, Atlanta and Phoenix see long, hot summers; Chicago and the northern states have heating seasons where destratification pays back. Tell us your city and the port that suits you — Houston, Savannah, New York–New Jersey or Los Angeles–Long Beach.

Houston
Dallas
Atlanta
Phoenix
Chicago
Los Angeles
Questions

Buying HVLS Fans In USA

Yes. Run in reverse, the fan brings warm air collected under the roof back down to floor level, so the space feels warmer without extra heat input.

The mains supply in the USA runs at 60 Hz, and requirements differ from Europe. Share your site’s voltage, phase and any listing requirements and we confirm what can be supplied before you order. For reference, TUV Nord has CE certified the AS geared range.

Orders travel by sea to ports such as Houston, Savannah, New York–New Jersey or Los Angeles–Long Beach, with invoice, packing list and certificate of origin.

Yes. The VFD interface is BMS compatible, with a keypad for local operation.

Gearless ASGL fans run below 40 dB; geared AS fans run at 60 – 65 dB.

A 24 ft model serves as much as 20,000 square feet. Racking, mezzanines and clear height change the count — we mark positions from your drawings.

Export Enquiry

Get A Quote For Your USA Site

Send your city, floor area, clear height and electrical supply. We confirm the specification and reply within one working day with models, positions and a proforma.

Not sure which fan size fits your facility?

Send us your shed dimensions and roof height. We will come back with a fan size, a quantity and a layout drawing — free of charge.

Call Now